Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Setting up OpenNIC on Windows 7, 8, 10 ====== - Right click the WiFi or Ethernet symbol in your task bar and click "Open Network and Sharing Center"\\ {{:setup:open-network-and-sharing-center.png|}} - Select the link next to "Connections", as shown highlighted below:\\ {{http://i.imgur.com/KNFXgcw.png|}} - Select Properties. Admin rights will be needed to perform this step.\\ {{http://i.imgur.com/4an8Ypf.png|}} ====IPv4==== - Select Internet Protocol Version 4 (TCP/IPv4), then click Properties.\\ {{http://i.imgur.com/9MjngDb.png|}} - Select Use the following DNS server addresses, then enter any two of the IPv4 addresses from the [[https://servers.opennic.org/|server list]]:\\ {{http://i.imgur.com/1ap2Z7N.png|}} - Click OK, Close, and Close to close the 3 dialog boxes, then exit Network and Sharing Center. ====IPv6==== - Select Internet Protocol Version 6 (TCP/IPv6), then click Properties.\\ {{https://i.imgur.com/Bi6hvR4.png|}} - Select Use the following DNS server addresses, then enter any two of the IPv6 addresses from the [[https://servers.opennic.org/|server list]]:\\ {{https://i.imgur.com/uo7QdwS.png|}} - Click OK, Close, and Close to close the 3 dialog boxes, then exit Network and Sharing Center. ====Congrats!==== You should now be able to visit OpenNIC domains, you can test by navigating to http://grep.geek in your browser of choice! /wiki/data/pages/setup/windows.txt Last modified: 6 years agoby Swardu